Sheet, ribbon, wire 20g - 20mn5 - 1.1133
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 1.1133 | 1518 | 20Mn5 | Delivery from the stock, in stock |
Evek GmbH offers to buy sheets, strips, wires, which are made of manganese-coated construction steel 20G, 20Mn5 and 1.1133. Supplier is provided with economically advantageous price from the manufacturer. Compliance with the assortment of rolled products, as well as its timely delivery to the address set by the customer is ensured.
Chemical composition
Production of manganese-alloyed structural steel grade 20 G is carried out in accordance with the technical standards
- Carbon, % - 0,17...0,24;
- Silicon, % - 0,17...0,37;
- Manganese, % - 0,70...1,00.
There are sulfur and phosphorus as nonmetallic impurities, the quantity of each of the elements shall not exceed 0,025%, traces of copper and nickel are permissible.
The best known foreign analogues of 20 G steel are 20Mn5 and 1.1133. These steels are melted to European standards EN 20269 and EN 10250 and have the following chemical composition:
| Component | C | Si | Mn | Ni, Cr | Mo | MO |
|---|---|---|---|---|---|---|
| Percentage steel content | 0,17...0,23 | Not more than 0.40 | 1,0...1,5 | Not more than 0.40 | Not more than 0.10 | Not more than 0,02 |
The limit for phosphorus and sulfur is 0.035%. European standards require that 20Mn5 and 1.1133 steels contain traces of titanium and niobium. The total percentage of nickel, chromium and molybdenum is also limited to a maximum of 0.63%.
Evek GmbH offers to buy sheets (sheets and strips) and wires made of manganese structural steel 20G, 20Mn5 and 1.1133 at producer price. The supplier provides strict adherence to the range of supply of rolled products, its timely delivery to the customer is guaranteed.
Properties and application
The steel grades 20G, 20Mn5 and 1.1133 are used for the production of such typical machine elements as traverses, rods, flat levers and other similar parts of hoisting machinery. The steels are well welded and can be processed on presses and metal-cutting equipment.
The physical and mechanical characteristics of steels after heat treatment are as follows:
- Tensile strength - 460 MPa;
- Ultimate ductility - 280 MPa;
- Relative elongation - 24%;
- The relative narrowing of the cross section - 50%;
Buy sheet, strip, wire manganese structural steel grades 20 G, 20Mn5, 1.1133 at the best price from the manufacturer offers the company Evek GmbH. Supplier guarantees timely delivery of products to the address specified by the customer, as well as the implementation of the range of ordered profiles.