The company Evek GmbH offers to buy structural alloy steels of 18X11MNFB type as well as its closest foreign analogues. The price is from the manufacturer. The supplier provides prompt delivery of products to the location specified by the customer

Buy for economical price from the manufacturer alloyed medium carbon steel grade 18Х11МНФБ, as well as its foreign counterparts of the steel - brand X22CrMoV12-1 and 1.4923 offers the company Evek GmbH. The supplier constantly monitors the performance of the nomenclature range of supplies of cold-rolled steel - sheets, strips and wires. Timely delivery of products to the point specified by the customer is guaranteed.

Composition and properties

18X11MNFB structural steel which is additionally alloyed with chrome, molybdenum, nickel and vanadium is produced in the CIS countries in accordance with the specifications of the producing enterprises. European analogues of this steel are produced in accordance with EN10269 standards. The chemical composition of the listed steels is approximately the same, and corresponds to the following data:

Alloying element	C	Mn	Si	Cr	Mo	Ni	V
Percent	0,18...0,24	0,4...0,9	Not more than 0,5	11,0...12,5	0,8...1,2	0,3...0,8	0,25...0,35

Phosphorus and sulfur are also present as metallurgical impurities. Their percentage in steel should not exceed 0.03%.

Rolled sheets and wires made of these materials have the following mechanical characteristics:

• Tensile strength - not lower than 800 MPa;
• Ultimate ductility - not lower than 600 MPa;
• Relative elongation - not less than 14%;
• Relative contraction - not less than 40%;
• Impact toughness - not less than 20 ^kJ/m2.

Buy wire, sheet, ribbon of alloyed steel 18Х11МНФБ, X22CrMoV12-1 and 1.4923 offers the company Evek GmbH. The favorable price from the manufacturer of these products. Supplier guarantees timely delivery to the address specified by the consumer.

Application

Alloy constructional steels of the above grades are widely used in the production of parts and normalized fasteners, the use of which at the sites of mechanisms, machines and structures is accompanied by constant fluctuations in temperature. According to a number of physical and mechanical properties, which are regulated by the European standard EN 10088-1, 18X11MNFB, X22CrMoV12-1 and 1.4923 steels are not inferior to stainless steels of the same use. The steels considered are forged and stamped, subjected to cold sheet stamping operations, and also satisfactorily machined on metal-cutting machines. The materials are characterized by satisfactory weldability.

Evek GmbH offers to buy steel bands, wires and sheets made of 18X11MNFB, X22CrMoV12-1 and 1.4923 structural alloy steels. A favorable price from the manufacturer of these products is valid. The supplier guarantees the necessary assortment minimum of delivery, and also provides timely delivery of the goods to the point specified by the customer.