Sheet, ribbon, wire 16gs - 15ga
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 16GS | Delivery from the stock, in stock |
Evek GmbH offers to buy sheets, strips and wires made of silicon-manganese structural steel 16GS and 15GA at an economical price from the manufacturer. Supplier provides strict compliance with delivery dates and the range of sold sections of rolled products. Product delivery is made promptly and to the location specified by the customer.
Chemical Composition
Low-alloy structural steel 16GS is characterized by high content of silicon and manganese. Production of this steel in CIS countries is carried out according to
| Component | C | Si | Мn | Ni, Cr, Cu | N | As |
|---|---|---|---|---|---|---|
| Percentage steel content | 0,12...0,18 | 0,40...0,70 | 0,90...1,20 | Maximum 0.30 | 0.008 max | Not more than 0.08 |
According to
One of the foreign analogues of steel 16GS is a low-carbon steel 15GA, which differs by the increased content of silicon and manganese. Steel 15GA is produced by Polish metallurgical industry under the norms of the national standard PNH 84018, and its composition is practically equal to steel 16GS.
The company Evek GmbH offers to buy sheets, strips, wires made of low-alloy constructional steel 16GS and 15GA. There are favorable prices from the manufacturer. Supplier guarantees the performance of the nomenclature range of supply, provides timely delivery of products to the customer.
Properties and application
Structural silicon-manganese steels 16GS and 15GA are used for welded structures working under increased pressure. These constructions include parts of steam boilers, flanges and other shut-off and power fittings, which are operated at 450-4750 С. The steels are not sensitive to negative temperatures, withstand internal pressures up to 260...280 ata, are not prone to formation of flaws and are not prone to brittleness after tempering.
The mechanical characteristics of rolled sheets and wires of 16GS and 15GA steels are as follows:
- Tensile strength, MPa - 450 ... 490;
- yield strength, MPa - 275...320;
- Relative elongation, % - 21;
- Relative narrowing, % - 50...55;
- Impact toughness, kJ/m2 - 600...620.
Buy sheet, strip and wire, which are obtained from low-alloy structural steel grades 16GS and 15GA offers the company Evek GmbH. The supplier guarantees the price from the manufacturer. Prompt delivery of rolled metal products to the address specified by the consumer is provided.