Sheet, strip, wire 16g2af - p460n - s420n

Sheet, ribbon, wire

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
16g2af p460n Delivery from the stock, in stock

Evek GmbH offers to buy sheets, strips, wires of constructional low-alloy steel grades 16GAF, P460N, S420N at the manufacturer's price. The supplier guarantees compliance with the range of supply of products and its timely delivery to the customer.

Evek GmbH offers to buy rolled metal sheets (sheets, bands) and wires made of 16GAF, P460N and S420N low-alloy steels at producer price. Supplier guarantees favorable price from the manufacturer. Prompt delivery of rolled products to the address set by the consumer is provided.

Chemical composition

Low-alloyed medium-carbon steel of 16GAF grade is produced in CIS countries according to technical requirements of GOST 19281. The steel belongs to the group of corrosion-resistant steels, and has the following chemical composition:

Component C Si Мn V Cr Ni
Percentage content in steel 0,14...0,20 0,30...0,60 0,80...1,20 0,08...0,14 0.40 max Not more than 0.30

According to GOST 19281 in steel may be present in the associated nitrogen, whose amount is in the range 0.015 ... 0.025%. There are also metallurgical impurities - phosphorus (not more than 0,035%), and sulfur (not more than 0,04%).

The closest foreign analogues of 16GAF steel are P460N and S420N. The chemical composition of these steels differs slightly from each other, but the difference with 16GAF steel is significant. This can be seen in the table, which corresponds to S420N:

Component C Si Mn V Cr Ni Mo Cu Nb Ti
Percentage content in steel Not more than 0.20 Not more than 0.60 1,00...1,70 0,10...0,20 Not more than 0.30 Not more 0.80 .80 Not more than 0.10 Not more than 0.70 Not more than 0.05 Not more than 0.03

P460N and S420N steels also contain aluminum (up to 0.02%), nitrogen (up to 0.025%), phosphorus (up to 0.035%) and sulfur (up to 0.03%). For P460N steel, the combined percentages of niobium and titanium can be as high as 0.22%.

Evek GmbH offers to buy sheets, strips and wires of 16GAF, P460N, S420N low-alloy steels at producer price for production of welded structures. Supplier provides product delivery to any point specified by the customer.

Properties and application

These steels are used in the manufacture of products of transport engineering - railway cars, locomotives and subway trains. The high corrosion resistance of metal increases the service life of equipment that operates under conditions of constantly changing temperatures and operating forces, including alternating ones. The steels are characterized by good weldability. Steel 16GAF is considered a substitute for steel 10ХСНД.

Mechanical properties:

  • Tensile strength is 980 MPa;
  • Tensile strength - 200 MPa;
  • Tensile strain - 11%;
  • Tensile stress - 11%; Relative narrowing - 14%;
  • Tensile strength - 340 kJ/m2;
  • Brinell hardness - 430 NV.

Buy sheet, strip. wire of structural steel 16GAF, P460N, S420N at favorable price from the manufacturer offers the company Evek GmbH. Supplier provides performance of assortment range of deliveries and prompt delivery of rolled products to the address specified by the customer.