Sheet, strip, wire 09g2s - 13mn6 - 09g2s
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 09G2S | A516-55 | Delivery from the stock, in stock |
Buy sheet, strip, wire, made of construction low-alloy steel grades 09G2S, 13Mn6 and 09g2s offers the company Evek GmbH. Supplier guarantees the cost-effective price of its products from its delivery of rolled products to the address specified by the consumer.
Chemical composition
Low-alloy structural steel 09G2S belongs to the group of construction steel. It is produced in CIS countries according to
| Component | C | Si | Mn | Cr | Ni | Cu |
|---|---|---|---|---|---|---|
| Percentage content | Not more than 0.12 | 0,50...0,80 | 1,30...1,70 | 0,30 | 0,30 | 0,25 |
The steel also contains metallurgical impurities - sulfur and phosphorus. Their percentage cannot exceed 0.035%.
The closest counterparts of this steel in Europe and the USA are 09g2s (produced according to Polish national standard norms), 13Mn6 (produced in Germany according to German DIN 17145 norms) and A132 (produced in the USA according to ASTM standard). The chemical composition of these steels differs from that given above. For example, the chemical compositions of 13Mn6 are given in the following table:
| Component | C | Component C, Si | Mn | S | P |
|---|---|---|---|---|---|
| Percentage content | 0,09...0,12 | 0,30...0,80 | 1,10...1.40 | Not more than 0.030 | Not more than 0.035 |
Buy rolled sheets - sheets, strips and wires made of low-carbon construction steel 09G2S, 13Mn6, 09g2s offers the company Evek GmbH. Supplier provides the price of products from its manufacturer. Guaranteed delivery of rolled products to the address specified by the customer.
Properties and application
A distinctive feature of the steels of the reviewed grades is their high weldability. In this case, these steels have sufficient strength, and therefore are used in the manufacture and installation of various welded structures: pipelines, masts of power lines, building structures, etc
Steels can be satisfactorily machined with metal-cutting equipment, it is possible to perform separating shaping operations, as well as bending. Deep drawing is impossible.
The main physical and mechanical characteristics of 09G2S, 13Mn6 and 09g2s steels are:
- Tensile strength, MPa - 480;
- yield strength, MPa - 370;
- Tensile strain, % - 40;
- Brinell hardness, HB - not more than 200.
Company Evek GmbH offers to buy sheet, strip and wire of low-alloy structural steel 09G2S, 13Mn6 and 09g2s. Valid price from the manufacturer. The supplier provides the necessary assortment of supplied rolled products and guarantees delivery of products to the address specified by the customer.