45Kh14N14V2M / EI69 Heat-Resistant Sheet and Strip
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 45Х14Н14В2М | EI69 | Availability confirmed on request |
45Kh14N14V2M and EI69 flat products
45Kh14N14V2M, also written 45H14N14V2M, and EI69 are legacy designations for a high-alloy heat-resistant steel. Cross-reference tables may list other national grades, but no alternative should be accepted without comparing chemistry, product standard, heat treatment and required mechanical properties at the service temperature.
Sheet, strip and cut-blank requirements
Provide thickness, width, length or coil data, edge condition, surface, flatness, tolerance and quantity. State the governing standard, delivery or heat-treated condition, required room-temperature and elevated-temperature properties, test direction, grain or surface requirements and certificate type. If blanks will be formed, welded or machined, include the manufacturing route so the supplier can review the requested starting condition.
Technical reference data
| Fe | С | Si | Mn | Ni | P | S | Cr | W | Mo |
|---|---|---|---|---|---|---|---|---|---|
| basis | 0.4 — 0.5 | ≤ 0.8 | ≤ 0.8 | 13 — 15 | ≤0,035 | ≤0,02 | 13 — 15 | 2 — 2.8 | 0.25 — 0.4 |
| Range | GOST | s in | sT | d5 | y | Heat treatment |
|---|---|---|---|---|---|---|
| - | MPa | MPa | % | % | - | |
| Bar | 5949−75 | 710 | 315 | 20 | 35 | Tempering 810 — 830 °C, air, |
| t°C | E 10- 5 | a 10 6 | l | r | C | R 10 9 |
|---|---|---|---|---|---|---|
| Degree | MPa | 1/Gradus | W/(m-degree) | kg/m3 | J/(kg-radius) | Ohm-m |
| 20 | 2.08 | 14 | 8000 | 815 | ||
| 200 | 1.9 | 17 | 17 | 7930 | 945 | |
| 400 | 1.73 | 18 | 20 | 7840 | 511 | 1055 |
| 600 | 1.57 | 18 | 22 | 7760 | 528 | 1142 |
| 800 | 1.41 | 19 | 7660 |
| England | Hungary | Poland | GOST | France | Czech Republic | Japan |
|---|---|---|---|---|---|---|
| BS | MSZ | PN | AISI | AFNOR | CSN | JIS |
| 331S42 | SZ8 | 4H14N14W2M | S66009 | Z35CNWS14−14 | 17322 | SUH31 |
The preserved chemistry, property and cross-reference tables below are reference data. The purchase specification and certificate for the offered heat control acceptance.
Information needed for a quote
Send 45Kh14N14V2M or EI69, the standard, sheet or strip dimensions, condition, quantity, testing, certificate needs and U.S. delivery ZIP code.
Stock, production route, origin, minimum quantity, compliance, certification, price and final delivery are confirmed during quotation. Product descriptions and reference data are not stock or suitability guarantees.
Related products and contact
Request a U.S. quote
Evek LLC serves buyers throughout the United States. Typical delivery is 2–3 weeks, subject to the exact material, specification, dimensions, quantity and availability. Send your requirement to Evek LLC with the U.S. delivery ZIP code.