Sheet, strip 1.4435
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 03Х17Н14М3 | EI844 | 1.4435 | 316L | X2CrNiMo18-4-3 | Delivery from the stock, in stock |
Supplier
We offer to buy sheets, bands of alloy 1.4435 from specialized warehouses of the supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. The supplier Evek GmbH offers to buy sheets, a strip from alloy 1.4435, the price - optimal in this segment of rolled products.
Technical characteristics
Stainless low-carbon chrome-nickel steel of austenitic class. Specific weight 8.0 g/cm3. Alloys in this series have a high tensile strength under load and show increased strength at high temperature. The alloy is additionally alloyed with molybdenum, manganese, silicon, copper... The sulfur content of 0.008% to 0.03% facilitates welding.
Percentage composition of EN 10095-1999
| Fe | C | Si | Mn | Ni | P | S | Cr | Mo | Cu |
|---|---|---|---|---|---|---|---|---|---|
| basis | ≤ 0.03 | ≤ 1 | ≤ 2 | 12.5 - 15 | ≤ 0.045 | ≤ 0.015 | 17 - 19 | 2.5 - 3,5 | ≤ 0.11 |
sB - Ultimate short time strength 490-700 MPa
sT - yield strength for permanent deformation 190-240 MPa
d5 - Tensile elongation at break.
HB - Brinell hardness ≤ 215 MPa
Cold working
Turning, milling, grinding, drilling. Machinability is easier with a sulfur content of 0.015% to 0.030%. For polishability, a sulfur content of 0.015% maximum is recommended.
Heat Treatment
Normalizing, hardening, annealing, tempering.
Analogues
| England | EU | GOST | USA | USA | France |
|---|---|---|---|---|---|
| BS | EN | GOST | AISI | UNS | AFNOR |
| Z 3 CND 17 12 03 | X2CrNiMo18-14-3 | 03CR17NI14M3 | 316L | S 31603 | --- |
| Z 3 CND 18 14 03 | 03CR16NR15M3 |
Application
Production of high-strength parts (pipes and fittings, flanges, valves) for the needs of the pulp and paper and textile industries.
Buy, bargain price.
We offer sheet, strip alloy 1.4435, price - determined by the technological features of production without including additional costs. You can order products with non-standard parameters. We have the best price-quality ratio for the entire range of products. In the segment of stainless austenitic steel, Evek GmbH is a profitable supplier.