Sheet, tape 12x17
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 12X17 | X17 | 410 | Delivery from the stock, in stock |
Supplier
We offer to buy sheet, strip 12X17, alloy 1.4510i from specialized warehouses of supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. Supplier Evek GmbH offers to buy sheet, strip 12X17, alloy 1.4510, the price is optimal in this segment of rolled products.
Technical characteristics
Stainless chromium steel of ferrite class. Specific gravity 7.7 g/cm3. It is based on iron (Fe up to 81%). Steel is additionally alloyed with manganese, titanium, silicon, copper, resistant in oxidizing environments, as well as in atmospheric conditions, except for marine atmosphere.
Percentage composition
| Fe | С | Si | Mn | Ti | Ni | P | S | Cr | Cu |
|---|---|---|---|---|---|---|---|---|---|
| basis | ≤0,08 | ≤0,8 | ≤0,8 | ≤0,8 | ≤0,6 | ≤0,035 | ≤0,025 | 16-18 | ≤0,3 |
Susceptibility to pitting corrosion. Tendency to temper embrittlement. Limited weldability.
Cold machining
Turning, milling, grinding, drilling.
Heat Treatment
Normalization, hardening, annealing, tempering.
Mechanical properties (temperature 20 °С).
| Sheets | s in | d5 | y | Heat treatment |
|---|---|---|---|---|
| - | MPa | % | % | - |
| Thick | 440 | 18 | Annealed | |
| Thin | 460 | 20 | 740 - 780 °C annealed, |
sv - ultimate tensile strength
d5 - Tensile elongation at break.
Application
Heat exchangers, pipes. Welded structures that are not subject to shock loads and operating at temperatures not below -20 ° C.
Analogues
| Germany | EU | Spain | Italy | Poland | USA | France | Czech Republic | Japan |
|---|---|---|---|---|---|---|---|---|
| DIN, WNr | EN | UNE | UNI | PN | AFNOR | CSN | ||
| X3CrTi17 | X3CrTi17 | F.3115 | X3CrTi17 | 0H17T | 430Ti | Z4CT17 | 17041 | SUS430LX |
| X6CrTi17 | X5CrTi17 | X5CrTi17 | X6CrTi17 | 439 | Z8CT17 | |||
| X8CrNb17 | S43036 | |||||||
| X8CrTi17 | S43900 | |||||||
| TP430Ti |
Buy, bargain price.
We offer wire, sheet, strip 12H17, alloy 1.4510, aisi 430Ti, price - determined by the technological features of production without the inclusion of additional costs. You can order products with non-standard parameters. We have the best price-quality ratio for the whole range of products. In the ferritic steel segment, Evek GmbH is a profitable supplier.