Sheet, strip 08x21n6m2t - ep54
International Equivalent
Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
08Х21Н6М2Т | EP54 | Delivery from the stock, in stock |
Technical feature
Stainless high heat-resistant high-alloy chrome-nickel steel. Base — iron (Fe about 70%). Specific gravity 7.85 g/cm3. The alloy is additionally alloyed with manganese, molybdenum, titanium and silicon, combines corrosion resistance and high wear resistance. It has good resistance to pitting and crevice corrosion, stress corrosion cracking in aggressive environment.Percent composition (GOST 5632−72)
Fe | С | Si | Mn | Ni | P | S | Cr | Mo | Ti |
---|---|---|---|---|---|---|---|---|---|
basis | ≤0,08 | ≤0,8 | ≤0,8 | 5.5 — 6.5 | ≤0,035 | ≤0,025 | 20 — 22 | 1.8 — 2.5 | 0.2 — 0.4 |
Austenitic grade steel. Good weldability and machinability. Minimal need for maintenance, long service life. Brinell hardness: HB 10 -1 = 140 — 200 MPa
Mechanical properties (temperature 20°C)
Sheets | GOST | s in | sT | d5 | y | KCU | Heat treatment |
---|---|---|---|---|---|---|---|
- | MPa | MPa | % | % | kJ/m2 | - | |
Thick, | 7350−77 | 590 | 345 | 20 | 590 | Hardening 1025 — 1075 °C, water cooling, | |
Thin | 5582−75 | 590 | 22 | Hardening 1000 — 1080 °C, air cooling, |
Sv — Short-Term Strength Limit:
sT — Proportional limit (yield strength for permanent deformation):
d5 — Relative elongation at break:
Cold working
Turning, milling, grinding, drilling.
Thermal machining
Normalization, hardening, annealing, tempering.
Analogues
Germany | GOST | USA | Japan |
---|---|---|---|
DIN, WNr | GOST | AISI | JIS |
X2CrNiMoN225 | 0Х21Н6М2Т | S32900 | SUS329J1 |
329 |
Applications
Pipelines, pipe fittings, heat exchangers, reactors, permanently operating at temperatures up to t° 600 °C.
Supplier
We offer to buy sheet, strip from alloy 08х21н6м2т, Эп54 from specialized warehouses of the supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. Supplier Evek GmbH offers to buy sheet, tape of alloy 08x21n6m2t, ep54, the price is optimal in this segment of rolled products.
Buy, bargain price
We offer sheet, ribbon of alloy 08x21n6m2t, ep54, price — determined by the technological features of production without the inclusion of additional costs. It is possible to order products with non-standard parameters. In the segment of austenitic-ferritic steel, Evek GmbH is a profitable supplier.