Tape, foil 08x18n10 - 1.4301 - aisi 304
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 08X18H10 | EI825 | 1.4301 | 304 | X5CrNi1810 | Delivery from the stock, in stock |
Supplier
We offer to buy sheet, strip 08x18n10 - 1.4301 from a warehouse of supplier Evek GmbH, the price is the best in this segment of rolled products. Full compliance with international quality standards. On a site of the company the information on last arrivals of production is displayed. The supplier Evek GmbH offers to buy sheet, strip 08x18n10 today.
Technical characteristics
Stainless heat-resistant chrome-nickel steel of austenitic class. Other designation 0Х18Н10. The alloy is based on iron. Additionally alloying composition with manganese, titanium, copper. Specific sand 7,85 g/cm3. Hardness HB 10-1 = 170 MPa. Specific heat capacity 504 J/(kg-grad).
Percentage composition
| Fe | C | Si | Mn | Ni | S | P | Cr | Ti | Cu | Impurities |
|---|---|---|---|---|---|---|---|---|---|---|
| base | ≤0.08 | ≤0.8 | ≤2 | 9 - 11 | ≤0.02 | ≤0.035 | 17 - 19 | ≤0.5 | ≤0.3 | ≤0.3 |
Mechanical properties (t° 20°C)
| Range | GOST | s in | sT | d5 | y | Heat treatment |
|---|---|---|---|---|---|---|
| - | MPa | MPa | % | % | - | |
| Round, Ø 60 | 5949-75 |
470 | 196 | 40 | 55 | 1020 - 1100 °C hardening, |
| Bars, of specified strength | 18907-73 | 640-780 | 20 | |||
| Tungsten carbide-tipped rod | 18907-73 | 880-930 | ||||
| Forgings, | 25054-81 | 470 | 196 | 38-40 | 45-50 | |
| Thick plate | 7350-77 | 510 | 205 | 43 | t°1050 - 1100 °C, air cooling, | |
| Thin hardfaced plate, GOST | 5582-75 | 930 | 10 | |||
| Thin semi-narrowed sheet | 5582-75 | 740-930 | 25 | |||
| Sheet Thin, | 5582-75 | 510 | 185 | 45 | t°1050 - 1080o C, water cooling, | |
| Thin sheet | 4986-79 | 530 | 20-40 | t°1050 - 1080o C, air, |
Physical properties
| t° | E 10- 5 | a 10 6 | R 10 9 |
|---|---|---|---|
| Degree | MPa | 1/Grad | Ohm-m |
| 20° | 1.96 | 800 | |
| 200° | 17 | ||
| 500° | 18 |
Analogues
| England | EU | Germany | Italy | Spain | China | USA | France | Sweden | Japan |
|---|---|---|---|---|---|---|---|---|---|
| BS | EN | DIN, WNr | UNI | UNE | GB | AFNOR | SS | JIS | |
| 304S11 |
1.4301 |
1.4301 |
X3CrNi18-10 |
F.3504 |
0Cr19Ni9 |
304 |
304F00 |
2332 |
SUS304 |
| 304S15 | 1.4948 | 1.5301 |
X5CrNi18-10 | F.3551 | OCr18Ni9 | 304H | X5CrNi18-10 | 2333 | |
| 304S16 | X5CrNi18-10 | X5CrNi18-10 | S30400 | Z4CN19-10FF | |||||
| 304S17 | X6CrNi18-10 | X5CrNi18-9 | Z5CN17-08 | ||||||
| 304S18 | X6CrNi18-9 | Z6CN18-09 | |||||||
| 304S25 | Z7CN18-09 |
Applications
Welded chemical vessels, parts of furnace fittings, muffles, retorts, nozzles, exhaust systems, spark plug electrodes operating at temperatures from -196 to 600 °C.
Buy 08x18n10, favorable price.
Supplier Evek GmbH offers to buy sheet, strip 08x18n10 - 1.4301, the price - determined by the technological features of production without the inclusion of additional costs. Wholesale buyers - the price is preferential. It is possible to order the strip of non-standard parameters. We have the best price-quality ratio for the whole range of products. In the segment of heat-resistant stainless steel, the company Evek GmbH is a favorable supplier. Timely delivery is ensured by representatives in Eastern European cities.