Wire, Round, Bar Aluminum 7005 - AlZn4.5Mg1.5Mn
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 7005 | A97005 | AlZn4.5Mg1.5Mn | Delivery from the stock, in stock |
Supplier
We offer to buy aluminium rounds, bars, wires AlZn4.5Mg1.5M, 7005 from specialised warehouse of supplier Evek GmbH with delivery in any city. Full compliance with modern quality standards. Supplier Evek GmbH offers to buy aluminum round, bars, wire AlZn4.5Mg1.5M, price - optimal in this segment of rolled products.
Percent composition (ENAW-7005)
| Al | Fe | Si | Mn | Cr | Ti | Cu | Zr | Mg | Zn | Impurities |
|---|---|---|---|---|---|---|---|---|---|---|
| base | ≤0.4 | ≤0.35 | 0.2 - 0.7 | 0.06 - 0.2 | 0.01 - 0.06 | ≤0.1 | 0.08 - 0.2 | 1 - 1.8 | 4 - 5 | ≤0.15 |
Grade: 7000 series wrought aluminum alloy (zinc Zn is the main alloying element), Additionally alloyed with titanium. Aluminum content of 90 - 91%. Weldability without restrictions. Alloy is available in the form of sections and sheets, forging material, tubes.
Mechanical properties (temperature 20°C).
| Description | Designation |
|---|---|
| Rm - Tensile Strength (MPa) | 340-350 |
| Rp0.2 Proportional limit (yield strength for permanent deformation) (MPa) | 270-290 |
| d5 - Tensile strain (%) | 10% |
| A - Min. Elongation Lo = 50 mm (%) | 8% |
| Brinell hardness (HBW): | 110 |
Cold working
Plastic deformation, turning, milling, grinding, drilling.
Heat treatment
Artificial aging hardening, annealing.
Analogues
| Germany | EU | GOST | USA |
|---|---|---|---|
| DIN, WNr | EN | GOST | |
| 3.4335 | ENAW-AlZn4.5Mg1.5Mn | 1915 | 7005 |
| AlZnMg1 |
Buy a bargain price.
We offer a round, bar, wire of any aluminum alloys, price - determined by the technological features of production without the inclusion of additional costs. On the site of the company displays information about the latest arrivals of products. It is possible to order products with non-standard parameters. We have the best price-quality ratio for the entire range of products. In the segment of non-ferrous alloys Evek GmbH is a profitable supplier.