h15yu5 - 1.4767 feralia wire
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| ~Х15Ю5 | 1.4767 | K92400 | Delivery from the stock, in stock |
Technical characteristics
The basis fehrali is iron: its share of more than 70%. Alloy is additionally doped with aluminum, silicon, manganese, Nickel. Types of alloy are marked, depending on the percentage of the major components. Different ratios of elements in the alloy form different brands fehrali.
The percentage H15YU5 GOST 10 994−74
| Fe | CE | C | Al | Si | Ni | Cr | Mn | S | R | Ti | Sa |
|---|---|---|---|---|---|---|---|---|---|---|---|
| basis | ≤0,1 | ≤0,08 | 4.5 to 5.5 | ≤0,7 | ≤0,6 | 14−15,5 | ≤0,7 | ≤0,015 | ≤0,03 | 0,2−0,6 | ≤0,1 |
Melting point +1500°C
Hardness HB 10-1 = 150 — 200 MPa
Limit short-term strength 736 MPa
The limit of proportionality (yield strength for permanent deformation) 16 MPa,
The coefficient of thermal (linear) expansion (t° 20°C) 16 1/Deg
The specific heat of the material (t° 20°C) 480 j/(kg·deg)
| Fe | C | Si | Mn | P | S | Cr | Al |
|---|---|---|---|---|---|---|---|
| basis | ≤0,10 | ≤1,00 | ≤1,00 | ≤0,045 | ≤0,030 | 19,0−22,0 | 4,50−6,00 |
Physical properties
Density: 7.43 g/cm3
Melting point +1500°C
Other names 1.4767
BRIGHTRAY alloy ICA
CHRONIMO 1.4767
CrAl 20 5 — DIN 17470
Gilphal 135
HAFESTA 20−5
UGINOX F 20 AL
X8 CrAl 20−5 — DIN 17470
Use
Feralia tape, wire, thread are the basis of the resistance elements, the transforming power of the electric current into heat. Resistant a combination of high specific electric resistance and heat resistance. This alloy is widely used in domestic and industrial boilers and heaters, resistor devices.
Supplier
Offer buy fehrali tape, wire, filament with specialized warehouses supplier Evek GmbH with delivery to any city. Full compliance with GOST and international quality standards. Supplier Evek GmbH offers to buy fehrali tape, wire, thread, the price is optimal.
To buy, best price
The proposed heat-resistant alloys, resistance, price — due to the technological features of production without the inclusion of additional costs. On the company’s website shows information about latest product arrivals. You can order products in non-standard settings. In the segment of heat-resistant alloys, the company Evek GmbH — best supplier.
