Circle, wire, tube Mumetal 80 permalloy® - 2.4591
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 80NHS | Delivery from the stock, in stock |
Supplier
We offer to buy rounds, wires, tubes Mumetal 80 permalloy® - 2.4591 from specialized warehouses of supplier Evek GmbH with delivery in any city. Full compliance with GOST and international quality standards. Supplier Evek GmbH offers to buy circles, wire, tubes Mumetal 80 permalloy® - 2.4591, price - optimal.
Technical features
This alloy belongs to magnetically soft materials, has a coercive induction strength not exceeding 4 kA/m, the number 80 in the marking indicates an approximate nickel content of about 80%. It is characterized by minimal deviation of characteristics in the climatic temperature range. Magnetizes to saturation and in weak fields.
Percentage composition of
| Fe | C | Si | Mn | Ni | S | P | Cr | Ti | Al | Cu |
|---|---|---|---|---|---|---|---|---|---|---|
| 12.33 - 16.7 | ≤0.03 | 1.1 - 1.5 | 0.6 - 1.1 | 79 - 81.5 | ≤ 0.02 | ≤ 0.02 | 2.6 - 3 | ≤0.15 | ≤0.15 | ≤0.2 |
These alloys are smelted in special metallurgical furnaces with subsequent forging or rolling of ingots.
Mechanical properties (t 20°C)
| Range | GOST | s in | sT | d5 | y | Hardness |
|---|---|---|---|---|---|---|
| - | MPa | MPa | % | % | MPa HB 10-1 | |
| Bar, | 10160-75 | 540 | 145 | 40 | 130 |
Physical properties
| t°C | a 10 6 | Specific gravity | R 10 9 |
|---|---|---|---|
| Degree | 1/gradus | g/cm3 | Ohm-m |
| 20° | 8,50 | 620 | |
| 100° | 12.9 |
Applications
Cores of small transformers and relays operating in weak magnetic fields. Rolled section (0.05-0.02 mm) - the basis of cores of pulse transformers, magnetic amplifiers and proximity relays.
Buy at a bargain price.
We offer a circle, wire, tube Mumetal 80 permalloy® - 2.4591, the price - due to technological features of production without the inclusion of additional costs. On the website of the company displays information on the latest arrivals of products. It is possible to order rolled products with non-standard parameters. We have the best price-quality ratio for the entire range of products. In the precision alloys segment Evek GmbH is a profitable supplier.