Alloy H15YU5

  • Alloy Kh20H80-H
  • Alloy KhN70Yu-N
  • Alloy CrN20YUS (EC11)
  • Alloy X40H60
  • Alloy Kh27Yu5T (EI626)
  • Alloy Х27Ю5А (0Х27Ю5А)
  • Alloy Kh25H20 (EP74)
  • Alloy X23Yu5T
  • Alloy Х23Ю5А (0Х23Ю5А)
  • Alloy Kh23Yu5 (EI595)
  • Alloy Kh20H80-N-VI
  • Alloy Kh20H80
  • Alloy Kh20H73YUM-VI
  • Alloy X15Yu5
  • Alloy Kh15N60-N-VI
  • Alloy Kh15N60-H
  • Alloy X15H60
  • Alloy Kh13Yu4 (EI60)
  • Alloy Н80ХЮД-VI (Н80ХЮД)
  • Alloy H50XL
  • Alloy H50K10

    • Designation

    Name The value
    Designation GOST Cyrillic Х15Ю5
    Designation GOST Latin X15Ju5
    Transliteration H15Yu5
    By chemical elements Cr15Al5

    Description

    Alloy H15YU5 used: for the manufacture of resistive elements; electric heating devices.

    Note

    The heat resisting alloy in an oxidizing atmosphere containing sulfur and sulfur compounds, working with high-alumina ceramics; prone to sagging at elevated temperatures, can not withstand sudden dynamic loads.
    Alloy H15YU5 — substitute alloy Х13Ю4.

    Standards

    Name Code Standards
    Classification, nomenclature and General rules В30 GOST 10994-74
    Wire, steel, alloy В73 GOST 12766.1-90
    Tape В34 GOST 12766.2-90
    Bars and shapes В32 GOST 12766.3-90, GOST 12766.4-90, TU 14-11-245-88

    Chemical composition

    Standard C S P Mn Cr Si Ni Fe Al Ti Ca Ce Zr
    GOST 10994-74 ≤0.08 ≤0.015 ≤0.03 ≤0.7 13.5-15.5 ≤0.7 ≤0.6 Rest 4.5-5.5 0.2-0.6 ≤0.1 ≤0.1 ≤0.1
    Fe is the basis.
    In accordance with GOST 10994-74, the content of calcium and cerium is calculated. When smelting an alloy intended for the production of heating elements, fresh charge materials should be used. Waste of own marks may be used.

    Mechanical properties

    Section, mm σU, MPa d5, % d HB, MPa
    Cold-rolled steel strip of 0.2-3.2 mm in the delivery state according to GOST 12766.2-90
    ≤736 ≥16 - 150-200
    Wire cold-drawn heat-treated in the delivery condition according to GOST 12766.1-90 (the value is δ200)
    ≤740 - ≥16 -

    Description mechanical marks

    Name Description
    σU Limit short-term strength
    d5 Elongation after rupture
    d Elongation after rupture
    HB Brinell hardness number

    Physical characteristics

    Temperature r, kg/m3 R, Mr. · m a, 10-6 1/°C С, J/(kg · °C)
    20 7280 1240-1340 - 480
    1000 - - 16 -
    800 - - - 770

    A description of the physical symbols

    Name Description
    Е The normal elasticity modulus
    l Coefficient of thermal conductivity
    R UD. the resistivity
    С Specific heat

    Technological properties

    Name The value
    Microstructure Ferritic structure.
    Features of heat treatment After heat treatment of cold drawn wire mode: holding at 750 °C 30 min., cooling with the furnace to 150 °C, 48 h exposure, the value of temperature coefficient of electrical resistance of the AU in the temperature range from 20 to 100 °C is equal to 0,4·10-4 1/°C.
    Magnitnoi Ferromagnetic alloy.
    Survivability Survivability at a temperature of 1150 °C for at least 120 hours.
    The survivability of the alloy for heating elements At least 120 hours at a test temperature of 1150 °C. the recommended maximum operating temperature of the heating element from 750 °C at a thickness of 0.2 mm to 1000 °C at a thickness ≥ 6.0 mm.