CuAl10Fe1 Aluminum Bronze Sheet, Strip and Tube
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| BrAZh9-4 | CuAl10Fe1 | Availability confirmed on request |
CuAl10Fe1 aluminum bronze products
This page covers aluminum-iron bronze flat products and tube requested under CuAl10Fe1, BrAZh9-4 and related legacy descriptions. Similar names from different standards are not proof of equivalence. The purchase order should identify the governing standard, chemistry limits, product form and condition so the correct material can be checked.
Sheet, strip and tube requirements
For sheet or strip, provide thickness, width, coil or cut length, temper, surface and tolerances. For tube, state outside diameter, wall thickness, length, seamless or welded construction and any pressure, corrosion or inspection requirement. Cut blanks and drawing parts can be reviewed when the drawing and machining allowance are supplied.
Reference data
| Designation | Description |
|---|---|
| Si | up to 0.1 |
| Fe | 2 - 4 |
| Mn | up to 0.5 |
| Al | 8 - 10 |
| P | up to 0.01 |
| Cu | 84,3 - 90 |
| Zn | up to 1 |
| Pb | up to 0.01 |
| Sn | up to 0.1 |
| Rolled product | δ5 (%) | (%) - grad. | sT (MPa) | σ in (MPa) | Size | KCU (kJ/m2) | ψ % |
|---|---|---|---|---|---|---|---|
| hard alloy | 4-6 | 500-700 | |||||
| soft alloy | 35-45 | 400-500 |
| a 10 6 (1/Grad) | E 10- 5 (MPa) | T (Grad) | l (W/(m-grad)) | C (J/(kg-grad)) | r (kg/m3) | R 10 9 (Ohm-m) |
|---|---|---|---|---|---|---|
| 16.2 | 100 | 423 | ||||
| 1.16 | 20 | 58 | 7500 | 120 |
| Description | Designation | Description | Designation |
|---|---|---|---|
| - Tensile strength (tensile strength), in MPa | σ in | - relative slump at cracking, in % | å |
| - elastic limit, in MPa | σ0,05 | - torsional strength limit (ultimate tangential stress), in MPa | Jê |
| - yield strength, in MPa | σ0,2 | - bending strength limit, in MPa | σd |
| - relative elongation after rupture, in % | δ5,δ4,δ10 | - endurance limit at symmetrical bending cyclic load, in MPa | σ-1 |
| - compression (yield strength), in MPa | σcj0,05 and σcj | - torsional symmetrical cyclic load endurance limit, MPa | J-1 |
| - shear displacement, in % | ν | - number of load cycles | n |
| - short-term strength limit, in MPa | s in | - electrical resistivity, in Ohm-m | R and ρ |
| - relative contraction, in % | ψ | - nominal elastic modulus, in GPa | E |
| - impact toughness for specimens with concentrators according to species V and U, in J/cm2 | KCU and KCV | - Test temperature, °C | T |
| - yield strength - permanent deformation (limit of proportionality), in MPa | sT | - thermal conductivity coefficient, in W/(m- °С) | l and ë |
| - Brinell hardness | HB | - specific heat capacity in [J/(kg-rad) | C |
| - Vickers hardness | HV | - specific gravity kg/m3 | pn and r |
| - Rockwell hardness, Sc. | HRCe | - coefficient of linear thermal expansion (1/°C) | |
| - HRB Rockwell hardness, Sc. | HRB | - Longitudinal strength limit (MPa) | σtT |
| - Shore hardness | HSD | - modulus of elasticity (torsional shear) GPa |
Grade and application review
Aluminum bronzes are selected for combinations of strength, wear and corrosion resistance, but suitability depends on composition, heat treatment, product form and service conditions. State the mating materials, environment and applicable design code when these factors control the purchase. Reference tables below are informational and must be checked against the required specification.
Information required for a quote
Send the CuAl10Fe1, BrAZh9-4 or approved grade, governing specification, sheet, strip or tube form, dimensions, condition, quantity, testing, certificate requirements and U.S. delivery ZIP code.
Evek LLC reviews every requirement against the requested grade, specification, form, dimensions and quantity. Stock, production route, origin, minimum quantity, certification, price and compliance are confirmed during quotation; website text is not a stock or suitability guarantee.
Related products and contact
Request a U.S. quote
Evek LLC serves customers throughout the United States. Typical delivery is 2–3 weeks, subject to the material, specification, dimensions, quantity, production route and availability.
Send the complete requirement to Evek LLC and include the U.S. delivery ZIP code.