Zinc C0

Designation

Name The value
Designation GOST Cyrillic Ц0
Designation GOST Latin Ts0
Transliteration Ts0
By chemical elements Zn0

Description

Zinc C0 is applied: for the molded under the pressure of critical parts; production of zinc powder (GOST 12601−76) stamps PC1, PC2, PC3, PC4, PC6 and PC7, applied in electrical (for the production of chemical current sources), chemical, metallurgical, pharmaceutical and other industries; alloying of aluminum alloys; hot-rolled anodes used for zinc plating of parts by electroplating; the production of zinc boiler plates, made by rolling and are used in the shipbuilding industry as protectors for the protection of boilers and other heating devices from corrosion; foil designed for power sources of special purpose; General purpose tape with a thickness of 0.12−2.0 mm and a width of 20−280 mm, used in electrical, automotive and other industries.

Standards

Name Code Standards
Sheets and strips В53 GOST 1150-72, GOST 1180-91, GOST 18846-73
Hard alloys, ceramic-metal products and metal powder В56 GOST 12601-76
Non-ferrous metals, including rare, and their alloys В51 GOST 3640-94
Tape В54 GOST 598-90, GOST 18327-73

Chemical composition

Standard Fe Cu As Al Zn Sn Pb Cd
GOST 3640-94 ≤0.005 ≤0.001 ≤0.0005 ≤0.005 ≥99.975 ≤0.001 ≤0.0013 ≤0.004
Zn is the basis.
According to GOST 3640-94, the total mass fraction of normalized impurities should be ≤ 0.025%.

Mechanical properties

Section, mm σU, MPa d5, % y, % HB, MPa
Zinc in the state of delivery
120-170 40-50 60-80 -
120-140 0.3-0.5 ≥30 30-40

Description mechanical marks

Name Description
σU Limit short-term strength
d5 Elongation after rupture
y The relative narrowing
HB Brinell hardness number

Physical characteristics

Temperature Е, HPa r, kg/m3
20 95 7130

A description of the physical symbols

Name Description
Е The normal elasticity modulus
l Coefficient of thermal conductivity
R UD. the resistivity