Bronze Bra10zh4n4l (Brazhn10-4-4L)

  • Bronze БрА9Ж4Н4Мц1 (БрАЖНМц9-4-4-1)
  • Bronze VBr3
  • Bronze BrSu6F0.9 (VB24)
  • Bronze BrSu6C12F0.3 (VB23)
  • Bronze BrSu6N2Ts1 (VB24H)
  • Bronze BrSu4N5C3C20F0.3 (VBr2)
  • Bronze BrSu3NTs3C20F0.2 (VB23NTs)
  • BrSu3N3C3S20F bronze
  • Bronze BrSu3NTs3C20K0.6F0.2 (VB23NTsK)
  • Bronze BrS60H2,5
  • Bronze BrS3C30 (BrSS3-30)
  • Bronze BrS30
  • Bronze БрО1С22 (БрОС1-22)
  • Bronze БрА9Мц2Л (БрАМц9-2Л)
  • Bronze БрА9Ж4Н4 (БрАЖН9-4-4)
  • Bronze БрААЖ9Ж3Л (БрАЖ9-4Л)
  • Bronze БрА7Н4Ж2Л
  • Bronze БрА7Мц15Ж3Н2Ц2 (Neva-70)
  • Bronze БрА7Мц14Ж3Н2
  • Bronze БрА7Ж2,5Н1,5МП9
  • Bronze БрА7Ж1,5С1,5
  • Bronze БрАЖ6Н6 (БрАЖН11-6-6)
  • Bronze БрАА10Мц2Л (БрАМц10-2Л)
  • Bronze БрАЖ10Ж4Н4Л (БрАЖН10-4-4Л)
  • Bronze БрА10Ж3р (БрВАЖ9-4Л)
  • Bronze БрААЖ3Мц2 (БрАЖМц10-3-2)
  • Bronze БрА10Ж3 (БрВАЖ9-4)

    • Designation

    Name The value
    Designation GOST Cyrillic БрА10Ж4Н4Л
    Designation GOST Latin BpA10Zh4H4L
    Transliteration BrA10G4N4L
    By chemical elements BaAl10Fe4Ni4
    Name The value
    Designation GOST Cyrillic БрАЖН10-4-4Л
    Designation GOST Latin BpAZhH10-4-4L
    Transliteration BrAGN10-4-4L
    By chemical elements BaAlFeNi10-4-4

    Description

    Bronze Bra10zh4n4l used: for the manufacture of casting components for chemical and food industry, and parts operating at elevated temperatures; parts of valves and actuators to it; casting parts, metallurgical engineering (large casting crowns and bushings up to 1 ton).

    Note

    The coefficient of friction of bronze without lubrication of 0.23, with grease — 0,011.

    Standards

    Name Code Standards
    Non-ferrous metals, including rare, and their alloys В51 GOST 493-79
    Cast iron castings (grey and malleable cast iron) В81 OST 24.207.01-90
    Castings, non-ferrous metals and alloys В84 OST 24.916.01-71

    Chemical composition

    Standard P Mn Si Ni Fe Cu As Al Zn Sn Sb Pb
    GOST 493-79 ≤0.1 ≤0.5 ≤0.2 3.5-5.5 3.5-4.5 Rest ≤0.05 9.5-11 ≤0.5 ≤0.2 ≤0.05 ≤0.05
    OST 24.916.01-71 ≤0.1 ≤0.5 ≤0.2 3.5-5.5 3.5-5.5 Rest ≤0.05 9.5-11 ≤0.5 ≤0.2 ≤0.05 ≤0.05
    Cu is the basis.
    According to GOST 493-79 and OST 24.916.01-71 the total content of impurities is ≤ 1.50%. Impurities, which are not regulated, are included in the total amount of impurities.

    Mechanical properties

    σU, MPa d5, % HB, MPa
    Castings are supplied without heat treatment
    ≥587 ≥6 ≥170
    ≥587 ≥5 ≥160

    Description mechanical marks

    Name Description
    σU Limit short-term strength
    d5 Elongation after rupture
    HB Brinell hardness number

    Physical characteristics

    Temperature r, kg/m3
    20 8200

    A description of the physical symbols

    Name Description
    l Coefficient of thermal conductivity
    R UD. the resistivity